mcv-l540

Vertical Machining Center - Linear Ways Series

MCV-L540

  • X, Y, Z-axis travel 560 x 400 x 400 mm
  • BT40 spindle taper
  • The direct drive spindle provides 10,000, 12,000 or 15,000 rpm
  • Linear ways on X, Y, Z-axis
  • 16 Tools arm type automatic tool changer
  • Fully enclosed splash guard
  • Fanuc / Mitsubishi control system
  • Spindle cooler is standard equipment

FEATURES

Direct Drive Spindle

  • The direct drive spindle provides 10,000, 12,000 or 15,000 rpm
  • The spindle taper is BT40
  • The high speed spindle dramatically upgrades machining efficiency and surface finish of cut

direct-drive-spindle-linear-ways

SPECIFICATIONS

Model MCV-L540
Table
Working surface 420 x 700 mm
T-slots (number x size x pitch) 3 x 14 x 100 mm
Max. table load 300 Kg
Travel
Longitudinal travel (X) 560 mm
Cross travel (Y) 400 mm
Headstock travel (Z) 400 mm
Distance between spindle end and table top 325 - 725 (with raiser) mm /
130 - 530 (Standard type) mm
Spindle
Type of tool shank BT40
Spindle speeds DDS 10000 (std.) RPM /
12000, 15000 (opt.) RPM
Spindle speed range 1
Spindle cooling / lubrication method Oil / Grease lubrication
Feed
Cutting feed 1 ~ 10000 mm/min
Rapid traverse (X / Y / Z) 36 / 36 / 30 m/min
Minimum input increment 0.001 mm
ATC
Type Arm
Tool holder BT40
Tool storage capacity 16 /20 tools
Max. tool weight 8 Kg
Max. tool dia. of adjacent pots are empty 150 mm
Tool selection Random
Tool change time 3 sec
Motors
Spindle motor 7.5 kW
X axis 1.6 kW
Y axis 1.6 kW
Z axis 3.0 kW
Installation Requirements
Power 15 KVA
Voltage 220 V / 50 Hz
Pneumatlc pressure 6-8 kg/cm²
Pneumatlc flowrate 100 L/min
Floor space 1850 x 2290 x 2650 mm
Net weight 2800 Kg

*Note: Due to continuous research and development, the machine design and specifications are subject to change without prior notice.

STANDARD ACCESSORIES

  • Fanuc / Mitsubishi control system
  • Fully enclosed splash guard
  • Rigid tapping
  • Automatic lubrication system
  • RS-232 interface
  • Work lamp
  • Automatic power off
  • Spindle air blast
  • Leveling bolts & pads
  • Electrical handwheel
  • Tool box with tools & operation manual
  • Call light
  • Table guard
  • Oil circulating cooling system for spindle
  • Transformer
  • Heat exchanger for electrical cabinet
  • Oil pressure box (for gear head)

OPTIONAL ACCESSORIES

  • Arm ATC (16 / 20 / 24 Tools)
  • Rotary table (4th axis)
  • Chip conveyor
  • Export packing
  • Oil water separating tank

Need Inquire ?

If you need more information or quotation about this product, Our sales representative will reply as soon as possible