MCV-L1100 Model CNC Vertical Machine Centers by Top-One

Vertical Machining Center - Linear Ways Series

MCV-L1100

  • X, Y, Z-axis travel 1100 x 520 x 560 mm
  • BT40 spindle taper
  • Belt drive: 8,000 rpm (standard)
  • Direct Drive: 10,000, 12,000, 15,000 rpm (option)
  • Linear ways on X, Y, Z-axis
  • Arm type: 20/24 Tools
  • Fully enclosed splash guard
  • Fanuc / Mitsubishi control system
  • Spindle oil cooler is standard equipment

Inquiry

Catalog

Spec

FEATURES

Belt Drive Spindle

The belt drive spindle:  8,000 rpm

belt-drive-spindle-linear-ways

SPECIFICATIONS

Model MCV-L1100
Table
Working surface 600 x 1200 mm
T-slots (number x size x pitch) 5 x 18 x 100 mm
Max. table load 1000 Kg
Travel
Longitudinal travel (X) 1100 mm
Cross travel (Y) 520 mm
Headstock travel (Z) 560 mm
Distance between spindle end and table top 150~ 710 mm
Spindle
Type of tool shank BT40
Spindle speeds Belt 8000 RPM (std.)
DDS 10000, 12000, 15000 RPM (opt.)
Spindle speed range 1
Spindle cooling / lubrication method Oil / Grease lubrication
Feed
Cutting feed 1~10000 mm/min
Rapid traverse (X / Y / Z) 48 / 48 / 36 m/min
Minimum input increment 0.001 mm
ATC
Type Arm
Tool holder BT40
Tool storage capacity 20 /24 tools
Max. tool weight 8 Kg
Max. tool dia. of adjacent pots are empty 150 mm
Tool selection Random
Tool change time 3 sec
Motors
Spindle motor 7.5 / 11 kW
X axis 3 kW
Y axis 3 kW
Z axis 4 kW
Installation Requirements
Power 25 KVA
Voltage 220 V / 50 Hz
Pneumatlc pressure 6-8 kg/cm²
Pneumatlc flowrate 100 L/min
Floor space 3250 x 3000 x 3000 mm
Net weight 6700 Kg

*Note: Due to continuous research and development, the machine design and specifications are subject to change without prior notice.

STANDARD ACCESSORIES

  • Fanuc / Mitsubishi control system
  • Fully enclosed splash guard
  • Rigid tapping
  • Automatic lubrication system
  • RS-232 interface
  • Work lamp
  • Automatic power off
  • Spindle air blast
  • Leveling bolts & pads
  • Electrical handwheel
  • Tool box with tools & operation manual
  • Call light
  • Table guard
  • Oil circulating cooling system for spindle
  • Transformer
  • Heat exchanger for electrical cabinet
  • Oil pressure box (for gear head)

OPTIONAL ACCESSORIES

  • Arm ATC (16 / 20 / 24 Tools)
  • Rotary table (4th axis)
  • Chip conveyor
  • Export packing
  • Oil water separating tank

Need Inquire ?

If you need more information or quotation about this product, Our sales representative will reply as soon as possible

Contanct Us